PGB PROCESS ENGINEER (CHEMICAL) EXP. IN POWER GENERATION, GASIFICATION, UTILITIES FOR SAUDI ARABIA

PGB Process Engineer (Chemical)

MAIN PURPOSE OF THE POSITION:
To provide technical process engineering support to the Power Generation Block through performance monitoring, process analysis, engineering calculations, troubleshooting, and improvement studies to ensure safe, reliable, and efficient plant operation.

JOB OBJECTIVES:
1. Performance Monitoring and Evaluation: Monitor and evaluate Power Generation Block equipment performance on daily basis through process data analysis, efficiency calculations, heat rate assessments, and KPI tracking. Responsible for updating PGB Performance dashboard on daily basis.
2. Process Engineering Analysis: Perform engineering calculations, heat and mass balances, system evaluations, and technical studies to identify process improvement opportunities and operational constraints.
3. Steam/Water Chemistry: Ensure effective and continuous monitoring of water and steam chemistry across all plant systems, including HRSGs, Kettle boilers, condensate, and feedwater, to maintain equipment integrity, optimize performance, prevent corrosion and scaling, ensure regulatory compliance, and support safe and reliable plant operation.
4. Water and Steam Balance Management: Develop and optimize plant water and steam balances to identify and reduce losses, maximize condensate recovery, improve resource utilization, and enhance overall plant efficiency.
5. Process Troubleshooting: report any Process Deviations to the line manager and investigate process deviations, efficiency losses, equipment performance issues, and operational upsets using data analysis and engineering principles.
6. Technical Support to Operations: Provide daily process engineering support to Operations by evaluating process conditions, recommending corrective actions, and optimizing operating parameters. Review Operating Procedures (SOPs/EOPs) developed by Operations department.
7. Process Safety and Compliance: Support compliance with operating envelopes, process safety requirements, environmental limits, and plant operating procedures.
8. Improvement Studies: Conduct technical evaluations and feasibility studies to improve plant efficiency, reliability, steam cycle performance, water consumption, and emissions performance.
9. Project and Modification Support: Provide process engineering support for plant modificationscovered under Management of Change (MOC), Design Notices, Risk Assessments, Root-Cause Analysis (RCA) and any commissioning activities (as required).
10. Technical Reporting: Prepare engineering reports, performance summaries, technical recommendations, and operating guidelines to support plant decision-making. Prepare and issue unit Trip Reports within 24 hours of upset.
11. Process Interface Management: Monitor and evaluate the impact of syngas quality, fuel gas composition, steam exports/imports, nitrogen integration, and utility interactions between the Power Generation Block and other areas of the IGCC to ensure stable and optimized integrated plant operation.
12. Operating Envelop management: Develop, maintain, and continuously review operating envelopes, process constraints, and performance limits for Power Generation Block systems to ensure safe, reliable, and optimized operation under varying plant loads and operating conditions.

QUALIFICATIONS AND WORK EXPERIENCE
Formal Qualifications/Education Essential Preferred Bachelor’s degree in chemical engineering, Process Engineering, or a related field
Certified Chemical Engineer (CCE) Certification from IChemE or equivalent
Job Related Work Experience Years
Work experience in process engineering, preferably in gasification, power generation, or related industries 6+ years
Experience with process modeling and simulation tools 6+ years

Job-Related Knowledge and Skills
Strong understanding of IGCC Power Generation processes, P&IDs, PFDs, and H&MBs including syngas-fired Gas Turbines, HRSGs, Steam Turbines, steam cycle systems, and power block interfaces with the Gasification Complex.
Comprehensive knowledge of water and steam cycle chemistry requirements, thermodynamics, heat transfer principles, heat rate calculations, and power plant efficiency optimization.

Ability to perform heat and mass balance calculations, energy accounting, and process performance evaluations to identify efficiency losses and improvement opportunities using engineering principles and performance analysis techniques/software.

Knowledge of Process Safety principles, Management of Change (MOC) process, HAZOP methodology, Risk Assessment and Root-Cause Analysis processes, environmental compliance requirements, and plant operating procedures.

Proficiency in process simulation, thermodynamic modeling, and performance analysis tools (such as Aspen Plus, Aspen Plus Dynamic, Aspen HYSYS, Gate Cycle or equivalent).

Strong capability in process data analysis using DCS, PI Historian, and performance monitoring systems to evaluate plant performance and identify operational deviations.

Ability to conduct process troubleshooting, root cause analysis, and performance gap investigations for operational upsets and efficiency losses.

Effective communication skills for technical reporting and team collaboration

WORK CONTEXT
Working hours: Regular
Position requires travel: Less than 10% annually
Posture: Sitting: 50% (e.g., analyzing data, creating process models, and preparing reports)
Standing: 30% (e.g., overseeing process operations, monitoring equipment)
Walking: 20% (e.g., inspecting systems, coordinating with teams in the field)
Physical danger: Medium risk
Position is directly accountable for: Equipment, Work outputs, Work methods, Safety

Submit your CV to bd@milleniummudamakmur.com