PGB PROCESS ENGINEER (MECHANICAL) EXP. IN POWER GENERATION, GASIFICATION, UTILITIES FOR SAUDI ARABIA

PGB Process Engineer (Mechanical)

MAIN PURPOSE OF THE POSITION:
To provide mechanical process engineering support to the Power Generation Block through equipment performance monitoring, mechanical and thermodynamic analysis, troubleshooting, reliability improvement initiatives, and optimization studies to ensure safe, reliable, and efficient plant operation.

JOB OBJECTIVES:
1. Performance Monitoring and Evaluation: Monitor and evaluate Power Generation Block equipment performance on daily basis through process data analysis, efficiency calculations, heat rate assessments, and KPI tracking. Responsible for updating PGB Performance dashboard on daily basis.
2. Process Engineering Analysis: Perform engineering calculations, thermodynamic assessments, equipment performance evaluations, and technical studies to identify efficiency losses, and improvement opportunities.
3. Heat Exchanger and Thermal Performance Monitoring: Evaluate heat exchanger, STG condenser, HRSG, and cooling system performance through heat transfer analysis, fouling assessments, and thermal efficiency evaluations to maximize system effectiveness.
4. Performance Diagnostic program Support: Support the Performance Diagnostic System (PDS) program for Gas/Steam Turbines by reviewing monthly performance reports, evaluating identified observations and performance gaps, coordinating with OEM when required, and developing corrective actions to improve equipment performance, reliability, and operational efficiency.
5. Process Troubleshooting: report any Process Deviations to the line manager and investigate process deviations, efficiency losses, equipment performance issues, and operational upsets using data analysis and engineering principles.
6. Technical Support to Operations: Provide daily process engineering support to Operations by evaluating process conditions, recommending corrective actions, and optimizing operating parameters. Review Operating Procedures (SOPs/EOPs) developed by Operations department.
7. Mechanical Integrity Support: Support mechanical integrity programs by monitoring equipment operating limits, evaluating process impacts on equipment health, and providing engineering recommendations to mitigate degradation mechanisms.
8. Improvement Studies: Conduct technical evaluations and feasibility studies to improve plant efficiency, reliability, steam cycle performance, water consumption, and emissions performance.
9. Project and Modification Support: Provide process engineering support for plant modifications covered under Management of Change (MOC), Design Notices, Risk Assessments, Root-Cause Analysis (RCA), and any commissioning activities (as required).
10. Technical Reporting: Prepare engineering reports, performance summaries, technical recommendations, and operating guidelines to support plant decision-making. Prepare and issue unit Trip Reports within 24 hours of upset.

QUALIFICATIONS AND WORK EXPERIENCE
Formal Qualifications/Education Essential Preferred Bachelor’s degree in mechanical engineering, Process Engineering or related field
Professional Engineer (PE) Certification
Work experience in process engineering, preferably in gasification, power generation, or related industries 6+ years
Experience with process modeling and simulation tools 6+ years

Job-Related Knowledge and Skills
Strong understanding of IGCC Power Generation processes, P&IDs, PFDs, and H&MBs including syngas-fired Gas Turbines, HRSGs, Steam Turbines, steam cycle systems, and power block interfaces with the Gasification Complex.
Advanced understanding of power block equipment and steam cycle systems, including gas turbines, steam turbines, HRSGs, condensers, and heat exchangers, with the ability to evaluate equipment performance, heat rate, efficiency, and thermal losses using engineering principles and performance analysis techniques / software.

Ability to perform heat and mass balance calculations, energy accounting, and process performance evaluations to identify efficiency losses and improvement opportunities. Knowledge of Mechanical Integrity and Asset Management principles.

Knowledge of Process Safety principles, Management of Change (MOC) process, HAZOP methodology, Risk Assessment and Root-Cause Analysis processes, environmental compliance requirements, and plant operating procedures.

Proficiency in process simulation, thermodynamic modeling, and performance analysis tools (such as Aspen Plus, Aspen Plus Dynamic, Aspen HYSYS, Gate Cycle or equivalent).

Strong capability in process data analysis using DCS, PI Historian, and performance monitoring systems to evaluate plant performance and identify operational deviations.

Ability to conduct process troubleshooting, root cause analysis, and performance gap investigations for operational upsets and efficiency losses.

Effective communication skills for technical reporting and team collaboration Proficient

WORK CONTEXT
Working hours: Regular
Position requires travel: Less than 10% annually
Posture: Sitting: 50% (e.g., analyzing data, creating process models, and preparing reports)
Standing: 30% (e.g., overseeing process operations, monitoring equipment)
Walking: 20% (e.g., inspecting systems, coordinating with teams in the field)
Physical danger: Medium risk
Position is directly accountable for: Equipment, work output, work method, safety

Submit your CV to bd@milleniummudamakmur.com